HomeKurzweil 3000Scanner Troubleshooting & InformationConfiguration: Canon Scanners

4.9. Configuration: Canon Scanners

Welcome to the Canon Scanner configuration site. Below you will see a list of configuration changes made to specific models of Brother scanners to work with Kurzweil 3000. These configuration changes should not be made unless you expierence issues with your scanner, using the default settings.

DR-2010C DR-2580C & DR F-120 (ADF) DR-3080CII
DR-9080C MX890 Pixima MX882

 

 DR-2010C

Last Updated: July 2015

Applies to Versions: Kurzweil 3000 v11 for Windows; may apply to other versions

Issue Summary:

You may encounter issues scanning with a Canon DR 2010C scanner in Kurzweil 3000 (K3000). Follow the Troubleshooting Steps below to possibly fix your scanning issues.

Troubleshooting Steps:

1. Before attempting troubleshooting, it's good practice to disable UAC on your computer. Follow these instructions to disable UAC: http://windows.microsoft.com/en-us/windows/turn-user-account-control-on-off#1TC=windows-7

2. Make sure you're using the latest version of K3000. This article covers updating K3000: http://support.cambiumtech.com/index.php?pg=kb.page&id=1210

3. Make sure to you install the latest drivers for your scanner. Drivers for your scanner can usually be found on the manufacturer's website. You may have to uninstall your older scanner software and drivers before installing an updated software/driver package for your scanner.

4. Close out of K3000.

5. On your computer, run the C:\Program Files (x86)\Kurzweil Educational Systems\Diags\ScanConf.exe file. This is a Scanner Configuration utility which can modify how K3000 interfaces with your scanner drivers.

6. In the Scanner Configuration window, use the following settings:

Select the Canon DR 2010C (TWAIN) driver

Simulate Xfer Ready: Always On

Click the Done button to apply the settings

7. Run K3000. Within the K3000 menu, go to Scan > Scanner Setup > Select Scanner...

Select the Canon DR 2010C (TWAIN) driver and click OK to initialize it.

8. Attempt to scan a document in K3000 as normal.

 

[BACK TO TOP]

 

 DR-2580C & DR F-120 (ADF)

Last Updated: October 2015

October update: Confirmed to also work with the *Canon DR F-120 which is a flatbed with ADF Duplex scanner.

*For the DR F-120 it's reccomended to go to Scan > Scanner Setup > Scanned Page Size and adjust to 8.5 X 11 if scanning normal pages, it defaults to 8.5 X14.

Applies to Versions: Kurzweil 3000 for Windows

Issue Summary:

You may encounter issues scanning with a Canon DR 2580C or the DR F-120 scanner in Kurzweil 3000 (K3000). Follow the Troubleshooting Steps below to fix your scanning issues.

Depending on the version of Windows and K3000 you're using, you may not encounter any scanning problems at all or the Troubleshooting Steps below may not resolve your scanning issues.

Troubleshooting Steps:

1. Before attempting troubleshooting, it's good practice to disable UAC on your computer. Follow these instructions to disable UAC: http://windows.microsoft.com/en-us/windows/turn-user-account-control-on-off#1TC=windows-7

2. Make sure you're using the latest version of K3000. This article covers updating K3000: http://support.cambiumtech.com/index.php?pg=kb.page&id=1210

3. Make sure to you install the latest drivers for your scanner. Drivers for your scanner can usually be found on the manufacturer's website. You may have to uninstall your older scanner software and drivers before installing an updated software/driver package for your scanner.

4. Close out of K3000.

5. On your computer, run the C:\Program Files (x86)\Kurzweil Educational Systems\Diags\ScanConf.exe file. This is a Scanner Configuration utility which can modify how K3000 interfaces with your scanner drivers.

6. In the Scanner Configuration window, use the following settings:

Select the Canon DR 2580C or DR F-120 TWAIN driver

Simulate Xfer Ready: Always On

Hold Scanner: Default

Native Scan: Off

Click the Done button to apply the settings

7. Run K3000. Within the K3000 menu, go to Scan > Scanner Setup > Select Scanner...

Select the Canon DR 2580C TWAIN or the DR F-120 TWAIN driver and click OK to initialize it.

8. Attempt to scan a document in K3000 as normal.

 

[BACK TO TOP]

 

 DR-3080CII 

Last Updated: July 2015

Applies to Versions: Kurzweil 3000 for Windows

Issue Summary:

You may encounter issues scanning with a Canon DR-3080CII scanner in Kurzweil 3000 (K3000). Follow the Troubleshooting Steps below to fix your scanning issues.

Depending on the version of Windows and K3000 you're using, you may not encounter any scanning problems at all or the Troubleshooting Steps below may not resolve your scanning issues.

Troubleshooting Steps:

1. Before attempting troubleshooting, it's good practice to disable UAC on your computer. Follow these instructions to disable UAC: http://windows.microsoft.com/en-us/windows/turn-user-account-control-on-off#1TC=windows-7

2. Make sure you're using the latest version of K3000. This article covers updating K3000: http://support.cambiumtech.com/index.php?pg=kb.page&id=1210

3. Make sure to you install the latest drivers for your scanner. Drivers for your scanner can usually be found on the manufacturer's website. You may have to uninstall your older scanner software and drivers before installing an updated software/driver package for your scanner.

4. Close out of K3000.

5. On your computer, run the C:\Program Files (x86)\Kurzweil Educational Systems\Diags\ScanConf.exe file. This is a Scanner Configuration utility which can modify how K3000 interfaces with your scanner drivers.

6. In the Scanner Configuration window, use the following settings:

Select the DR-3080CII TWAIN driver

Simulate Xfer Ready: Always On

Hold Scanner: Default

Native Scan: Off

Click the Done button to apply the settings

7. Run K3000. Within the K3000 menu, go to Scan > Scanner Setup > Select Scanner...

Select the  DR-3080CII TWAIN driver and click OK to initialize it.

8. Attempt to scan a document in K3000 as normal.

 

[BACK TO TOP]

 

 DR-9080C

Last Updated: July 2015

Applies to Versions: Kurzweil 3000 v12 for Windows 7 x86; may apply to other versions

Issue Summary:

You may encounter issues scanning with a Canon DR-9080C scanner in Kurzweil 3000 (K3000). Follow the Troubleshooting Steps below to possibly fix your scanning issues.

Troubleshooting Steps:

1. Before attempting troubleshooting, it's good practice to disable UAC on your computer. Follow these instructions to disable UAC: http://windows.microsoft.com/en-us/windows/turn-user-account-control-on-off#1TC=windows-7

2. Make sure you're using the latest version of K3000. This article covers updating K3000: http://support.cambiumtech.com/index.php?pg=kb.page&id=1210

3. Make sure to you install the latest drivers for your scanner. Drivers for your scanner can usually be found on the manufacturer's website. You may have to uninstall your older scanner software and drivers before installing an updated software/driver package for your scanner.

For flatbed scanning download the TWAIN drivers from the website and connect directly via USB.  Unclear if wireless drivers will function.

4. Close out of K3000.

5. On your computer, run the C:\Program Files (x86)\Kurzweil Educational Systems\Diags\ScanConf.exe file. This is a Scanner Configuration utility which can modify how K3000 interfaces with your scanner drivers.

6. In the Scanner Configuration window, use the following settings:

Select the Canon DR-9080C TWAIN driver

Force ADF Loaded: On

Native Scan: On

Simulate Xfer Ready: Always On

Click the Done button to apply the settings

7. Run K3000. Within the K3000 menu, go to Scan > Scanner Setup > Select Scanner...

Select the TWAIN driver and click OK to initialize it.

8. Attempt to scan a document in K3000 as normal.

 

[BACK TO TOP]

 

 DR-3080CII

Last Updated: July 2015

Applies to Versions: Kurzweil 3000 for Windows

Issue Summary:

You may encounter issues scanning with a Canon DR-3080CII scanner in Kurzweil 3000 (K3000). Follow the Troubleshooting Steps below to fix your scanning issues.

Depending on the version of Windows and K3000 you're using, you may not encounter any scanning problems at all or the Troubleshooting Steps below may not resolve your scanning issues.

Troubleshooting Steps:

1. Before attempting troubleshooting, it's good practice to disable UAC on your computer. Follow these instructions to disable UAC: http://windows.microsoft.com/en-us/windows/turn-user-account-control-on-off#1TC=windows-7

2. Make sure you're using the latest version of K3000. This article covers updating K3000: http://support.cambiumtech.com/index.php?pg=kb.page&id=1210

3. Make sure to you install the latest drivers for your scanner. Drivers for your scanner can usually be found on the manufacturer's website. You may have to uninstall your older scanner software and drivers before installing an updated software/driver package for your scanner.

4. Close out of K3000.

5. On your computer, run the C:\Program Files (x86)\Kurzweil Educational Systems\Diags\ScanConf.exe file. This is a Scanner Configuration utility which can modify how K3000 interfaces with your scanner drivers.

6. In the Scanner Configuration window, use the following settings:

Select the DR-3080CII TWAIN driver

Simulate Xfer Ready: Always On

Hold Scanner: Default

Native Scan: Off

Click the Done button to apply the settings

7. Run K3000. Within the K3000 menu, go to Scan > Scanner Setup > Select Scanner...

Select the  DR-3080CII TWAIN driver and click OK to initialize it.

8. Attempt to scan a document in K3000 as normal.

 

[BACK TO TOP]

 

 Pixima MX882

Last Updated: July 2015

Applies to Versions: Kurzweil 3000 v12 for Windows 7 x64; may apply to other versions

Issue Summary:

You may encounter issues scanning with a Canon Pixima MX882 Scanner scanner in Kurzweil 3000 (K3000). Follow the Troubleshooting Steps below to possibly fix your scanning issues.

Troubleshooting Steps:

1. Before attempting troubleshooting, it's good practice to disable UAC on your computer. Follow these instructions to disable UAC: http://windows.microsoft.com/en-us/windows/turn-user-account-control-on-off#1TC=windows-7

2. Make sure you're using the latest version of K3000. This article covers updating K3000: http://support.cambiumtech.com/index.php?pg=kb.page&id=1210

3. Make sure to you install the latest drivers for your scanner. Drivers for your scanner can usually be found on the manufacturer's website. You may have to uninstall your older scanner software and drivers before installing an updated software/driver package for your scanner.

For flatbed scanning download the TWAIN drivers from the website and connect directly via USB.  Unclear if wireless drivers will function.

4. Close out of K3000.

5. On your computer, run the C:\Program Files (x86)\Kurzweil Educational Systems\Diags\ScanConf.exe file. This is a Scanner Configuration utility which can modify how K3000 interfaces with your scanner drivers.

6. In the Scanner Configuration window, use the following settings:

Select the Canon Pixima MX882 Scanner TWAIN driver

Native Scan: Off

Hold Scanner: Default

Simulate Xfer Ready: Always On

Click the Done button to apply the settings

7. Run K3000. Within the K3000 menu, go to Scan > Scanner Setup > Select Scanner...

Select the TWAIN driver and click OK to initialize it.

8. Attempt to scan a document in K3000 as normal.

 

[BACK TO TOP]

 

Knowledge Tags

This page was: Helpful | Not Helpful